Skar Audio RP-1200.1D Review: Car Amplifiers Buying Guide
By Roger Holden. Researched product comparison.
A car amplifier supplies the real, clean power that aftermarket speakers and subwoofers need. A factory stereo only puts out a few watts per channel, so an amp is what makes music clear at volume and bass hit properly. The Skar Audio RP-1200.1D Monoblock Class D Amplifier is a high power per dollar option that I would short-list for budget subwoofer builds. Speakers that distort when you turn them up, a subwoofer that sounds weak, or a new speaker or sub purchase are the usual reasons people shop for an amplifier. Before you buy, it helps to know what this listing does well, where it falls short and whether it matches your car and the way you use it.
Key product details
- Main strength: High power per dollar
- Best for: Budget subwoofer builds
- Listed features: Class D mono, Remote bass knob, Bass boost, Low-pass filter, 1-ohm stable
- Watch for: Bigger than some, Ratings run optimistic
Who I would recommend it to
This pick makes the most sense for budget subwoofer builds. The listing highlights class D mono, remote bass knob, bass boost, low-pass filter and 1-ohm stable. Owners tend to point to huge value, lots of power and includes remote as the main reasons to choose it. If that matches how you drive and what you expect from your car's tech, it belongs on your list.
Compatibility and choosing the right one
Compatibility is where most car amplifier purchases go wrong. Decide what you are powering first: a mono amp for a subwoofer, a 4-channel amp for door speakers, or a 5-channel amp for both. Match the amp's RMS power at your speaker's impedance, not the inflated peak number on the box. Checking your exact vehicle and setup before ordering is what prevents a return.
Setup and everyday use
Run the power cable on the opposite side of the car from the RCA signal cables to avoid alternator whine. Set the gain with the stereo at about three-quarter volume and stop when the sound starts to distort; gain is not a volume knob. Check the fuse and ground connection if the amp ever cuts out, since loose power connections cause most problems. Keep the amp dry and away from spots where trunk cargo can press against the terminals. Keep the manual or quick-start guide, because the exact setup steps and settings vary from model to model.
What I would check before buying
The main limitations to weigh are: bigger than some and ratings run optimistic. None of these is a deal-breaker for the right buyer, but they matter if they describe your car or habits. Read the current listing details, compatibility notes and what comes in the box before ordering.
An alternative worth comparing
The Alpine S-A60M is the one I would compare next. Its strength is compact 600W mono, and it suits small cars and tight spaces. Choose it instead if that description fits you better than the Skar Audio RP-1200.1D. Read the alternative guide
Frequently asked questions
Will the Skar Audio RP-1200.1D work with my car?
Check the compatibility notes before ordering, since fit and features depend on your exact vehicle and setup. Decide what you are powering first: a mono amp for a subwoofer, a 4-channel amp for door speakers, or a 5-channel amp for both.
What size amplifier do I need?
Match the amp's RMS rating to your speakers' or subwoofer's RMS rating at the correct impedance. Peak wattage numbers are marketing, not a matching guide.
Mono or 4-channel amplifier?
Mono amps power subwoofers. 4-channel amps power door speakers. A 5-channel amp can do both in one box.
Will an amp work with my factory stereo?
Yes, with a line output converter or an amp that accepts speaker-level inputs.
My buying recommendation
Choose the Skar Audio RP-1200.1D if you are among budget subwoofer builds and it checks out against your vehicle. The right car amplifier, set up carefully, makes every drive more connected and more enjoyable.
Check the current Amazon listing
As an Amazon Associate I earn from qualifying purchases.