Lectron Level 1 WiFi Review and Buying Guide
By Roger Holden. Researched product comparison.
A home EV charger is the difference between waking up to a full battery and planning your week around public stations. Level 2 units add roughly 20 to 40 miles of range per hour, so overnight charging covers almost any commute. The Lectron Portable Level 1 J1772 EV Charger with WiFi (12A, 120V) is a plugs into a regular wall outlet option that I would short-list for plug-in hybrids and short commutes. Relying on a slow 120-volt cord, paying for public fast charging, or waiting in line at a shared station are the usual reasons owners upgrade to a dedicated home unit. Before you buy, it helps to know what this listing does well, where it falls short and whether it matches your vehicle and your electrical setup.
Key product details
- Main strength: Plugs into a regular wall outlet
- Best for: Plug-in hybrids and short commutes
- Listed features: 120V charging from a suitable grounded outlet and circuit, 12A output for modest daily charging needs, WiFi app scheduling, IP65 control box, Carrying case included
- Watch for: Much slower than Level 2, Not enough for long daily commutes in a big EV
Who I would recommend it to
This pick makes the most sense for plug-in hybrids and short commutes. The listing highlights 120V charging from a suitable grounded outlet and circuit, 12A output for modest daily charging needs, wiFi app scheduling, iP65 control box and carrying case included. Owners tend to point to may avoid a 240V upgrade when an existing circuit is suitable, backup cord for destinations with compatible power and smart features on a basic charger as the main reasons to choose it. If that matches your vehicle and how you charge, it belongs on your list.
Compatibility and choosing the right one
Compatibility is where most home EV charger purchases go wrong. Check your electrical panel first: a 40-amp charger needs a 50-amp breaker and suitable wiring, while plug-in models need the matching NEMA outlet. Confirm the connector your car uses. Most non-Tesla EVs use J1772, while newer NACS-port vehicles need a NACS plug or an adapter. Checking your exact vehicle, connector and circuit before ordering is what prevents a return.
Setup and everyday use
Hardwired installations and new 240-volt circuits should be done by a licensed electrician, and many areas require a permit. Plug-in models still need the correct outlet on a dedicated circuit; sharing a circuit with other loads can trip the breaker. Keep the connector holstered and off the ground so dirt and moisture stay out of the pins. Update the unit’s firmware when the app offers it; charging fixes and utility-program support often arrive that way. Keep the manual or app login details, because setup steps and settings vary from model to model.
What I would check before buying
The main limitations to weigh are: much slower than Level 2 and not enough for long daily commutes in a big EV. None of these is a deal-breaker for the right buyer, but they matter if they describe your vehicle or electrical setup. Read the current listing details, compatibility notes and what comes in the box before ordering.
An alternative worth comparing
The Autel MaxiCharger is the one I would compare next. Its strength is smart app control, 16-40A adjustable, and it suits owners who want a smart wall charger. Choose it instead if that description fits you better than the Lectron Level 1 WiFi. Read the alternative guide
Frequently asked questions
Will the Lectron Level 1 WiFi work with my EV?
Check the connector type and the listing's compatibility notes against your exact vehicle before ordering. Check your electrical panel first: a 40-amp charger needs a 50-amp breaker and suitable wiring, while plug-in models need the matching NEMA outlet.
Is Level 2 charging worth it at home?
For most daily drivers, yes. A Level 2 unit can refill a typical commute in an hour or two, so you stop planning around public chargers and can use cheaper overnight electricity rates where they are offered.
Can I install a home charger myself?
Plugging a unit into an existing, correctly rated 240-volt outlet is simple. Running a new circuit or hardwiring a unit is a job for a licensed electrician in most areas.
Will a 40-amp charger work on my panel?
Only if your panel has capacity for a 50-amp dedicated circuit. An electrician can do a load calculation, and some chargers let you dial the current down to fit a smaller circuit.
My buying recommendation
Choose the Lectron Level 1 WiFi if you are among plug-in hybrids and short commutes and it checks out against your vehicle and circuit. The right home EV charger, set up carefully, makes charging at home or on the road far easier.
Check the current Amazon listing
As an Amazon Associate I earn from qualifying purchases.