Craftsman 3-Ton Jack Stands Review: Braced legs

By Roger Holden. Researched product comparison.

Jack stands are what actually hold the car while you work. The jack lifts, the stands support, and nothing should ever be trusted to a hydraulic jack alone. The Craftsman 3-Ton Steel Jack Stands (CMXLETNT43002) is a braced legs option that I would short-list for general repairs. Planning any job that puts you under the car, from oil changes to exhaust work, is the reason to own a rated set rather than improvising with blocks. Before you buy, it helps to know what this listing does well, where it falls short and whether it matches your vehicle and the jobs you plan to do.

Key product details

Who I would recommend it to

This pick makes the most sense for general repairs. The listing highlights steel build, positive lock handle, welded leg braces, 11.25 to 16.75 inch range and rust-resistant coating. Owners tend to point to trusted brand, stable and easy ratchet as the main reasons to choose it. If that matches the jobs you tackle in your own garage, it belongs on your list.

Choosing the right one

Choosing the wrong size or rating is where most set of jack stands purchases go wrong. A wide base and a saddle that matches your pinch welds or axle shape make the setup more stable. Choose a rating with margin: a 3-ton pair suits most cars, while trucks and SUVs often call for 6-ton or taller stands. Buying for the vehicle and jobs you really have, not the biggest number on the box, is what keeps a tool from gathering dust.

Setup, safe use and everyday care

Lower the car onto the stands slowly, then push firmly on the car to confirm it is settled before going under. Keep the jack in place as a backup, lightly loaded, once the stands carry the weight. Store stands dry so the ratchet mechanisms do not corrode. Never exceed the rated capacity, and remember the rating is per pair only when the maker says so. Keep the manual with the tool, because the exact setup steps and safety limits vary from model to model.

What I would check before buying

The main limitations to weigh are: costs more than similar stands and mixed reviews on some sets. None of these is a deal-breaker for the right buyer, but they matter if they describe your vehicle or the jobs you do. Read the current listing details, ratings and what comes in the box before ordering.

An alternative worth comparing

The Torin Big Red 3-Ton is the one I would compare next. Its strength is double-locking ratchet, and it suits everyday garage work. Choose it instead if that description fits you better than the Craftsman 3-Ton. Read the alternative guide

Frequently asked questions

Is the Craftsman 3-Ton right for my vehicle?

Check the rating, size and compatibility notes against your exact vehicle and the jobs you plan before ordering. A wide base and a saddle that matches your pinch welds or axle shape make the setup more stable.

Are ratchet stands safe?

Quality ratchet stands from known brands are widely used, but pin-style or double-locking designs add a second layer of security. Whatever the design, inspect the teeth and pawl regularly.

Can I use stands on a sloped driveway?

No. Stands need level ground. On a slope the load shifts and the stand can tip.

What weight rating do I need?

A 3-ton pair covers most sedans and crossovers. Trucks and large SUVs are safer on 6-ton stands. The rating should comfortably exceed the weight on that end of the vehicle.

My buying recommendation

Choose the Craftsman 3-Ton if you are among general repairs and its limits do not get in your way. The right set of jack stands pays for itself the first time it turns a shop visit into a job you finish at home.

Check the current Amazon listing

As an Amazon Associate I earn from qualifying purchases.

Compare all jack stands