Nilight 6.7-Inch Review: Car Ramps Buying Guide
By Roger Holden. Researched product comparison.
Car ramps are the simplest way to get the front or back of a car off the ground for oil changes and underbody inspections, with no jacking and no stands to position. The Nilight Car Ramps, 6.7-Inch Lift, 16,000 lb GVW is a higher lift, 16,000 lb GVW option that I would short-list for sUVs and trucks. Dreading the jack-and-stands routine for routine oil changes, or wanting a quick way to look under the car, are the usual reasons people buy a set. Before you buy, it helps to know what this listing does well, where it falls short and whether it matches your vehicle and the jobs you plan to do.
Key product details
- Main strength: Higher lift, 16,000 lb GVW
- Best for: SUVs and trucks
- Listed features: 6.7-inch lift, 16,000 lb GVW, Wide tire path, Anti-slip pads, Tire stop
- Watch for: Bulky, Steeper climb
Who I would recommend it to
This pick makes the most sense for sUVs and trucks. The listing highlights 6.7-inch lift, 16,000 lb GVW, wide tire path, anti-slip pads and tire stop. Owners tend to point to more room underneath, strong rating and wide as the main reasons to choose it. If that matches the jobs you tackle in your own garage, it belongs on your list.
Choosing the right one
Choosing the wrong size or rating is where most set of car ramps purchases go wrong. Low-profile ramps matter for cars with low front splitters; standard ramps can hit the bumper before the tire climbs. Match the ramp width to your tire width so the tire sits fully on the ramp surface. Buying for the vehicle and jobs you really have, not the biggest number on the box, is what keeps a tool from gathering dust.
Setup, safe use and everyday care
Stop as soon as the tires are centered on the flat top, set the parking brake and chock the wheels still on the ground. Never work under a car supported only by ramps unless the ramps are rated for it and the car cannot roll; use jack stands for anything beyond a quick look. Inspect for cracks before each use, especially around the leading edge where the tire first climbs. Keep the contact surfaces clean of oil so tires do not slip on the way up. Keep the manual with the tool, because the exact setup steps and safety limits vary from model to model.
What I would check before buying
The main limitations to weigh are: bulky and steeper climb. None of these is a deal-breaker for the right buyer, but they matter if they describe your vehicle or the jobs you do. Read the current listing details, ratings and what comes in the box before ordering.
An alternative worth comparing
The ROBLOCK Low Profile is the one I would compare next. Its strength is low approach angle, and it suits lowered cars. Choose it instead if that description fits you better than the Nilight 6.7-Inch. Read the alternative guide
Frequently asked questions
Is the Nilight 6.7-Inch right for my vehicle?
Check the rating, size and compatibility notes against your exact vehicle and the jobs you plan before ordering. Low-profile ramps matter for cars with low front splitters; standard ramps can hit the bumper before the tire climbs.
Will ramps work on a low car?
Only low-profile ramps with a shallow approach angle. Standard ramps often contact the front lip of lowered or sporty cars before the tire reaches them.
Can I use ramps on gravel or grass?
No. Ramps need a hard, level surface so they cannot slide or sink as the tire climbs.
Are ramps safer than a jack and stands?
For jobs where the wheels stay on, ramps are very stable because the car sits on its own tires. They are not a substitute for stands when a wheel has to come off.
My buying recommendation
Choose the Nilight 6.7-Inch if you are among sUVs and trucks and its limits do not get in your way. The right set of car ramps pays for itself the first time it turns a shop visit into a job you finish at home.
Check the current Amazon listing
As an Amazon Associate I earn from qualifying purchases.