Powerbuilt Unijack Jack Stands Review: Jack and stand in one
By Roger Holden. Researched product comparison.
Jack stands are what actually hold the car while you work. The jack lifts, the stands support, and nothing should ever be trusted to a hydraulic jack alone. The Powerbuilt 3-Ton All-in-One Jack Stand (640912) is a jack and stand in one option that I would short-list for unibody cars and SUVs. Planning any job that puts you under the car, from oil changes to exhaust work, is the reason to own a rated set rather than improvising with blocks. Before you buy, it helps to know what this listing does well, where it falls short and whether it matches your vehicle and the jobs you plan to do.
Key product details
- Main strength: Jack and stand in one
- Best for: Unibody cars and SUVs
- Listed features: Lifts and holds in one spot, Wide base, Safety bar, 11 to 21 inch range, Unibody pad
- Watch for: Slow to lift, Large
Who I would recommend it to
This pick makes the most sense for unibody cars and SUVs. The listing highlights lifts and holds in one spot, wide base, safety bar, 11 to 21 inch range and unibody pad. Owners tend to point to fewer tools, good for tall SUVs and one-point setup as the main reasons to choose it. If that matches the jobs you tackle in your own garage, it belongs on your list.
Choosing the right one
Choosing the wrong size or rating is where most set of jack stands purchases go wrong. Pin-style and double-locking stands resist accidental release better than basic ratchet designs. A wide base and a saddle that matches your pinch welds or axle shape make the setup more stable. Buying for the vehicle and jobs you really have, not the biggest number on the box, is what keeps a tool from gathering dust.
Setup, safe use and everyday care
Set the stands on hard, level ground under the factory-specified support points, never on asphalt that is soft in summer heat without a board under them. Lower the car onto the stands slowly, then push firmly on the car to confirm it is settled before going under. Inspect the welds, ratchet teeth and locking pins before each use and retire any stand that is bent, cracked or rusty at the joints. Store stands dry so the ratchet mechanisms do not corrode. Keep the manual with the tool, because the exact setup steps and safety limits vary from model to model.
What I would check before buying
The main limitations to weigh are: slow to lift and large. None of these is a deal-breaker for the right buyer, but they matter if they describe your vehicle or the jobs you do. Read the current listing details, ratings and what comes in the box before ordering.
An alternative worth comparing
The Craftsman 3-Ton is the one I would compare next. Its strength is braced legs, and it suits general repairs. Choose it instead if that description fits you better than the Powerbuilt Unijack. Read the alternative guide
Frequently asked questions
Is the Powerbuilt Unijack right for my vehicle?
Check the rating, size and compatibility notes against your exact vehicle and the jobs you plan before ordering. Pin-style and double-locking stands resist accidental release better than basic ratchet designs.
What weight rating do I need?
A 3-ton pair covers most sedans and crossovers. Trucks and large SUVs are safer on 6-ton stands. The rating should comfortably exceed the weight on that end of the vehicle.
Are ratchet stands safe?
Quality ratchet stands from known brands are widely used, but pin-style or double-locking designs add a second layer of security. Whatever the design, inspect the teeth and pawl regularly.
Can I use stands on a sloped driveway?
No. Stands need level ground. On a slope the load shifts and the stand can tip.
My buying recommendation
Choose the Powerbuilt Unijack if you are among unibody cars and SUVs and its limits do not get in your way. The right set of jack stands pays for itself the first time it turns a shop visit into a job you finish at home.
Check the current Amazon listing
As an Amazon Associate I earn from qualifying purchases.