Sunex 10-Ton Jack Stands Review: Tall pin-type stands
By Roger Holden. Researched product comparison.
Jack stands are what actually hold the car while you work. The jack lifts, the stands support, and nothing should ever be trusted to a hydraulic jack alone. The Sunex 10-Ton High Height Pin Type Jack Stands (1410) is a tall pin-type stands option that I would short-list for lifted trucks. Planning any job that puts you under the car, from oil changes to exhaust work, is the reason to own a rated set rather than improvising with blocks. Before you buy, it helps to know what this listing does well, where it falls short and whether it matches your vehicle and the jobs you plan to do.
Key product details
- Main strength: Tall pin-type stands
- Best for: Lifted trucks
- Listed features: Up to 46.5 inches tall, Wide square base, Heavy pipe tube, 10-ton per pair, Tethered pin
- Watch for: About 115 lb, Hard to store
Who I would recommend it to
This pick makes the most sense for lifted trucks. The listing highlights up to 46.5 inches tall, wide square base, heavy pipe tube, 10-ton per pair and tethered pin. Owners tend to point to huge height range, very strong and pin lock can't slip as the main reasons to choose it. If that matches the jobs you tackle in your own garage, it belongs on your list.
Choosing the right one
Choosing the wrong size or rating is where most set of jack stands purchases go wrong. Check the minimum and maximum height against your vehicle’s lift points and the clearance you need. Pin-style and double-locking stands resist accidental release better than basic ratchet designs. Buying for the vehicle and jobs you really have, not the biggest number on the box, is what keeps a tool from gathering dust.
Setup, safe use and everyday care
Keep the jack in place as a backup, lightly loaded, once the stands carry the weight. Set the stands on hard, level ground under the factory-specified support points, never on asphalt that is soft in summer heat without a board under them. Never exceed the rated capacity, and remember the rating is per pair only when the maker says so. Inspect the welds, ratchet teeth and locking pins before each use and retire any stand that is bent, cracked or rusty at the joints. Keep the manual with the tool, because the exact setup steps and safety limits vary from model to model.
What I would check before buying
The main limitations to weigh are: about 115 lb and hard to store. None of these is a deal-breaker for the right buyer, but they matter if they describe your vehicle or the jobs you do. Read the current listing details, ratings and what comes in the box before ordering.
An alternative worth comparing
The Powerbuilt Unijack is the one I would compare next. Its strength is jack and stand in one, and it suits unibody cars and SUVs. Choose it instead if that description fits you better than the Sunex 10-Ton. Read the alternative guide
Frequently asked questions
Is the Sunex 10-Ton right for my vehicle?
Check the rating, size and compatibility notes against your exact vehicle and the jobs you plan before ordering. Check the minimum and maximum height against your vehicle’s lift points and the clearance you need.
Can I use stands on a sloped driveway?
No. Stands need level ground. On a slope the load shifts and the stand can tip.
What weight rating do I need?
A 3-ton pair covers most sedans and crossovers. Trucks and large SUVs are safer on 6-ton stands. The rating should comfortably exceed the weight on that end of the vehicle.
Are ratchet stands safe?
Quality ratchet stands from known brands are widely used, but pin-style or double-locking designs add a second layer of security. Whatever the design, inspect the teeth and pawl regularly.
My buying recommendation
Choose the Sunex 10-Ton if you are among lifted trucks and its limits do not get in your way. The right set of jack stands pays for itself the first time it turns a shop visit into a job you finish at home.
Check the current Amazon listing
As an Amazon Associate I earn from qualifying purchases.